In the previous chapter, we created a parameter node with two configurable parameters:

simple_int_param → default value 23
simple_string_param → default value "lavitra"

In this chapter, we will interact with those parameters directly from the ROS 2 command line.

We will learn how to:

Start the parameter node
List available parameters
Read a parameter’s value
Start a node with a different parameter value
Change a parameter while the node is running
Observe the parameter-change callback

Source the workspace

Before running our ROS 2 node, we need to source the workspace.

Open a terminal and go to your workspace:

cd bumperbot_ws

Then source the workspace:

. install/setup.bash

Run the Parameter Node

Now we can start the parameter node that we created in the previous chapter.

For the Python implementation, run:

ros2 run bumperbot_py_examples simple_parameter

The command follows this structure:

ros2 run <package_name> <executable>

In our case:

			
ros2 run
   │
   ├── bumperbot_py_examples
   │          ↓
   │      package name
   │
   └── simple_parameter
              ↓
          executable

		

So:

ros2 run bumperbot_py_examples simple_parameter

starts the simple_parameter node from the bumperbot_py_examples package.

Keep this terminal running. We will use another terminal to interact with the parameters.

List the Parameters

Open a new terminal. ctrl+O

Source the workspace again:

cd bumperbot_ws
. install/setup.bash

Now run:

ros2 param list

It shows the parameters available for the currently running ROS 2 nodes.

Read a Parameter’s Value

Now that we know the parameter exists, we can read its current value.

Use:

ros2 param get /simple_parameter simple_int_param

You should see that the current value is 23

Understanding `ros2 param get`

Let’s break the command down:

ros2 param get /simple_parameter simple_int_param

			
ros2 param get
      │
      ├── /simple_parameter
      │       ↓
      │     Node
      │
      └── simple_int_param
              ↓
          Parameter

		

So the command means:

Get the value of simple_int_param from the /simple_parameter node.

The general syntax is:

ros2 param get <node_name> <parameter_name>

Start the Node With a Different Parameter Value

Press Ctrl+c to stop the running simple_parameter node.

Now start it again, but this time set simple_int_param to 30:

 ros2 run bumperbot_py_examples simple_parameter --ros-args -p simple_int_param:=30

Understanding `--ros-args` and `-p`

The command contains two important parts:

--ros-args

and:

-p simple_int_param:=30

`--ros-args`

This tells ROS 2 that additional ROS-specific arguments are being provided.

`-p`

The -p option is used to provide a parameter value.

So:

-p simple_int_param:=30

means:

Set simple_int_param to 30 when starting the node.

The complete command therefore means:

			
Start simple_parameter
        │
        ▼
Use ROS arguments
        │
        ▼
Set simple_int_param
        │
        ▼
30

		

Check the New Value

The node is now running again, but this time:

simple_int_param = 30

We can verify it from another terminal.

Run:

ros2 param get /simple_parameter simple_int_param

Read the String Parameter

We can read it using:

ros2 param get /simple_parameter simple_string_param

The command follows the same structure:

ros2 param get <node> <parameter>

Change a Parameter While the Node Is Running

One of the most useful features of ROS 2 parameters is that we do not necessarily need to restart the node to change a parameter.

We can change a parameter while the node is already running.

For example, let’s change:

simple_string_param

from:

lavitra

to:

tech_arcanist